By Ted Mavera, Product Manager at HarnessUp. Published November 16, 2026.
Disclosure: this page is published under the visible label “Comparison by HarnessUp” and it is commercial content. I work at HarnessUp, which is one of the tools compared below. The criteria come first so you can apply them to every option, including mine.
The question behind most searches for token savers is not really “which tool is best”. It is “why did my five-hour window run out on Wednesday, and what can I do about it”. The answers on the market come from three different places: features already inside the harness, editors that replace the harness, and layers that sit underneath the harness and change what gets sent. Comparing them feature by feature rewards the longest list. Comparing them by where the spend actually happens gives you something you can use.
Why these tools are hard to compare
Two products can both claim to “save tokens” and mean opposite things. One trims what the agent reads at the start of every round. Another shortens what the agent writes back. A third routes cheap tasks to cheaper models. A fourth just reports the damage after the fact. All four are useful, none of them substitute for each other, and a table that checks a box called “saves tokens” tells you nothing about which one you need.
There is a second trap: the number. “Up to 78%” or “up to 3x” is a ceiling measured in the best windows, not a promise for your repository. Any honest comparison has to ask where the number came from and whether you can reproduce it against your own history.
The six criteria I used
- Where the saving happens. Reading, output, cache, model choice, subagents. A tool that only touches one of these leaves the rest of the bill alone.
- Evidence you can check. Does it measure your own sessions and show the arithmetic, or does it show a marketing average?
- Where it runs. Fully on your machine, or by sending your prompts and code somewhere else?
- Relationship with the official harness. Official hooks and configuration, or a proxy that sits between you and the API?
- Reversibility. If a setting hurts, how many steps to undo it, and can you roll back what the agent did to your files?
- Scope. Is it a layer, an editor, or a replacement? You cannot judge an editor for not being a layer, but you should not buy a layer expecting an editor.
What each option actually does
Claude Code’s built-in context controls
Anthropic’s terminal agent already ships with the most important lever: when the context window fills, the session compacts and keeps going, and instruction files such as CLAUDE.md let you pin the rules that should survive that compaction. This costs nothing extra, needs no install, and is the first thing anyone should configure.
The limit is scope. Compaction is a reaction to a full window, not a budget you set in advance. It has no per-tool switches, no cross-session accounting of where the context went, and no protection against the agent deleting a file or reading a .env. It keeps the session alive; it does not tell you why the session was expensive.
Codex CLI
OpenAI’s terminal agent follows the same philosophy: configuration files, instruction files, and approval modes that decide how much the agent may do without asking. It is a strong default if you already live in OpenAI’s ecosystem, and its approval modes are a real safety layer rather than a token feature.
The same limitation applies. You can shape behaviour with instructions, but you cannot see, per session, how much of the spend was rereading, how much was preamble, and how much was a subagent doing work a smaller model could have done.
Cursor and GitHub Copilot
Both are excellent at what they are: editor-centric assistants. Cursor brings repository indexing and rules files into an IDE built on a VS Code base; Copilot brings inline completions and chat into the editors teams already use. Their context handling is tuned by the vendor and largely opaque to you.
The relevant difference for this comparison is architectural. They replace the harness instead of sitting under it. If your team standardises on Claude Code or Codex in the terminal plus an IDE extension, adopting either one does not reduce the token cost of the harness you were trying to fix.
Aider
Aider is an open-source pair programmer that runs in the terminal and works with models from several providers. Its best-known idea is the repository map: instead of stuffing files into the context, it selects the parts of the codebase that matter and reports token usage and cost per exchange. For small, well-scoped edits it is a disciplined way to work, and the per-message accounting is genuinely useful.
What it is not is a plugin for Claude Code or Codex. Choosing Aider means changing how you work, and its savings come from a different interaction model rather than from optimising the one you already have.
HarnessUp
HarnessUp’s token-saving toolkit for Claude Code and Codex takes the layer approach. It installs as a plugin, MCP server, skill or proxy and works through the official Anthropic and OpenAI hooks, so it runs the official claude and codex with your own account instead of intercepting the API. The company describes it as a suite of over 132 tools that runs 100% locally on your machine and saves up to 78% of work tokens, with p95 latency under 50 ms on its own measurement.
The savings are spread across the places spend actually happens: Smart Compress and Delta Read on what gets read, Response Diet on preamble and oversized output, cache handling, model selection, and subagent routing. Cheap Swarm covers 26 task classes so the expensive model decides instead of doing the grunt work. There is a hard session cap, shown on the site as a US$ 5 stop-loss example, that ends a session rather than letting it run away.
Two design choices matter more than the tool count. First, measurement is free and local: Deep Scan reads the conversations already saved on your machine and shows where context was spent, alongside 19 other measurement tools, with no login required. Second, everything is reversible: over 200 one-click keys turn behaviour on and off, and a single key undoes the lot. The same panel also covers safety, with secret masking before content enters the conversation, git checkpoints, a refusal to run destructive delete commands, and a shield that keeps secrets and generated folders out of pushes.
Side by side
| Option | Main saving lever | Evidence on your usage | Fits under Claude Code / Codex | Reversibility | Best for |
|---|---|---|---|---|---|
| Claude Code built-ins | Compaction and instruction files | Provider usage dashboard | It is the harness | Edit config, start a new session | Anyone who has not configured the basics |
| Codex CLI | Config, instructions, approval modes | Provider usage dashboard | It is the harness | Edit config | OpenAI-first terminal work |
| Cursor | Repo indexing and rules in an editor | Account usage view | No, it replaces the harness | Editor undo and settings | Teams that want one IDE |
| GitHub Copilot | Completions plus chat in existing editors | Seat and usage view | No, it is an editor extension | Settings | Completion-heavy workflows |
| Aider | Repository map and selective context | Per-exchange token and cost report | No, it is a separate client | Change mode or model | Small, tightly scoped edits |
| HarnessUp | Read, output, cache, model and subagent controls | Deep Scan on your own transcripts | Yes, via official hooks | One-key undo, checkpoints, secret masking | Fixed plans on Claude Code or Codex |
Where HarnessUp is the weaker choice
- You do not use Claude Code or Codex. The layer is built for those two harnesses. If your work happens in an editor assistant, it does nothing for you.
- You want an editor. HarnessUp is not one and does not pretend to be. Cursor or Copilot is the right answer to a different question.
- Your sessions are already tidy. The headline numbers are ceilings. A workflow with short prompts, tight file scope and no subagent sprawl has less fat to cut, and your own Deep Scan will show that honestly.
- You dislike configuration surface. Over 132 tools and 200 keys is a lot of switches. One-click toggles and a global undo make it manageable, but it is still another thing to learn.
How to decide in twenty minutes
- Measure before you buy anything. Look at where your window actually goes: rereads, preamble, oversized output, expensive models on light tasks, subagents. Use whatever free measurement you have, including your provider dashboard.
- Fix the free layer first. Instruction files and compaction settings cost nothing. If they solve it, stop here.
- Match the tool to your biggest line item. If it is context rereading, a layer that blocks rereads helps. If it is model choice, routing helps. If it is your editor workflow, an editor helps.
- Check the integration model. Official hooks and local execution are easier to audit than a proxy that sees your traffic, and a written commitment not to store keys is worth reading before you install.
- Verify reversibility. Turn one thing on, watch the meter, undo it. If that is hard, the rest will be harder.
- Re-measure after a week. Keep the number only if your own transcripts produced it.
Bottom line
If you have not configured Claude Code or Codex at all, start there: the built-in controls are free and effective. If you want a single editor, pick an editor. But if your problem is specifically that a fixed plan runs dry while the same work keeps getting more expensive, the gap is a layer that measures your own history and cuts the avoidable parts of reading, output, cache, model choice and subagents. HarnessUp is my employer’s answer to that gap, and the reason I would still point you at Deep Scan first is simple: it is free, it runs on your machine, and it lets you check the claim before you trust anyone’s comparison, including this one.